How should high pressure hot and cold water cleaners be pressurized?

High pressure hot and cold water cleaning machine is a new type of cleaning equipment emerging in recent years, can be applied to remove scale, iron scale, oil scale and other hydrocarbon residue coke, and can remove a variety of coatings, resin layer, pigments, rubber, gypsum, concrete, plastic, etc., which has the characteristics of low cleaning cost, good cleaning quality, fast cleaning speed, no environmental pollution, no damage to the cleaned object, wide range of applications, etc.. Especially in recent years, it has been widely used in shipbuilding, petroleum, chemical, electric power, metallurgy and other industrial sectors.

Pressurization method:
1. When using high-pressure piston pump booster, high-pressure piston pump itself has a compact structure, small volume, less piping, beautiful appearance and other characteristics of the complex structure. It is easier to achieve high-volume automated production and assembly, but requires higher sealing materials. If the booster in the high-pressure hot and cold water cleaning machine used as an environmental booster, it is easy to reach 3000 bar of ultra-high pressure; if the sealing method is slightly improved, it can even reach 5000 bar pressure.

2. Since the booster plunger itself has a relatively low moving speed, so it is usually only 0.2m / s, and the sealing requirements are not high, so the water inlet pressure is low. The water can be shut off without the need for a tank, which avoids water overflowing into the tank during use. In addition, each group of superchargers is independent, so when one group of superchargers in the high pressure cleaner fails, the others automatically accelerate and provide a greater flow.

In fact, all objects being cleaned have a threshold pressure, and to clean the object clean, just break the threshold pressure to complete the cleaning. But many customers have a lot of misconceptions in the choice of cleaning machine, often the general pursuit of pressure, but the efficiency and effectiveness will be a big shortfall. In fact, high-pressure hot and cold water cleaning machine is an important parameter is the striking force, if the pressure to determine whether the object can be cleaned, the striking force important unit is the water flow, the size of the water flow to determine the cleaning efficiency, there is a more complex matching.

Previous: Troubleshooting and use of high-pressure hot and cold water cleaning machine matters Next: How to optimize the structure of high-pressure cleaning machine plunger pump discharge valve spool